Choose serial type


Air Supply for COSMOS Gas Generator

Compressed Air production, Supply Air to Zero Air generator, Supply Air to Nitrogen generator


The COSMOS Air Compressor produces continuous, high quality oil-free, pre-dried air.

The COSMOS Air Compressor is the ideal solution for providing compressed air to a Zero Air and Nitrogen Generator, and for powering pneumatic valves or other applications in the lab.

The COSMOS Air Compressor can be stack to any stack COSMOS H2, Zero Air and Nitrogen generators, typically as the base unit – to give you a complete self-contained GC gas solution, even where no house supply is available.

Thanks to a unique compressor mounting system, the COSMOS Air Compressor also benefits from low noise and vibration making it relatively quiet in operation within a typical laboratory.

Reference :




The COSMOS Air Compressor offers high reliability and long life expectancy due to its technological choices : unique cooling system and ultra resistant piston rings and segments.

The Oil-free compressor ensures the production of clean air to meet the constraints of laboratory applications.


  • Compressed Air supply for COSMOS Nitrogen and Zero Air Generators
  • Noise level and vibration very low
  • Flow rate : 26 L/min with a maximum pressure of 8 bar (116 psi)
  • Membrane dryer fitted to have clean and dry air
  • Automatic drain
  • Automatic Stand-by mode, when no compressed air is required, ensures long compressor life
  • LED indicators status (Ready, Stand-by, Alarm, Off)
  • Remote PC monitoring and diagnostic analysis via USB/RS232 to interface the unit with customer’s PC software (allow to carry out checks and maintenance effectively, only via a remote connection)


Flow rate 26 L/min
Max outlet pressure 8 bar (116 psi)
Outlet air Dew Point -20°C (-4°F)
Air tank capacity 4 L
LED indicators status Ready, Stand-by, Alarm, Off
Operating temperature range 5 – 25°C (41 – 77°F)
Automatic Stand by mode Yes
Particles filtration 0.1 microns
Electrical supply 220 – 240 V ac / 1 ph / 50 – 60 Hz
110 – 120 V ac / 1 ph / 50 – 60 Hz
Power consumption 510 – 1150 W
Noise level @ 1M < 50 dB(A)
Dimension (W x H x D) 30 x 40 x 54 cm (12″ x 15.8″ x 21.3″)
Weight (kg/lbs) 35 / 77
Outlet gas connection 1/4 BSPP
USB/RS232/PC Control In series


Commercial documentation
Setup guide
User manual
Missing an information ?