Hydrogen Gas Generator for GC
The COSMOS MB.H2 generator is designed for GC-detectors requiring H2 fuel gas such as FID, FPD, NPD and TCD.
The Hydrogen gas is produced from deionised water using the exclusive 100% titanium Proton Exchange Membrane (PEM) technology, which provides a very high reliability, new longer life and better purity.
The COSMOS MB.H2 series use a unique static membrane dryer, maintenance free, which allow to dry the H2 gas and increase the purity.
The automatic checking for internal leaks whenever starting the unit and constant control of operating parameters, guarantee maximum safety.
The touch screen interface provides simple and user-friendly management of all functions on the unit.
IMPROVED CHROMATOGRAPH RESULT
The use of hydrogen as a carrier gas allows lower temperature elution, thus extending the life of the chromatograph column. Hydrogen as a carrier gas is faster and more sensitive than the more-expensive helium. Run time savings of 25% to 35% without a decline in resolution.
INCREASED LABORATORY EFFICIENCY
A constant, uninterrupted gas supply of guaranteed purity eliminates interruptions of analyses to change cylinders and reduces the amount of instrument re-calibrations required.
The very limited internal volume (less than 50 ml) allows safe use of the gas generators where the use of cylinders is risky or prohibited.
The application of tested safety technologies stops the unit in the event of leaks or malfunctions
Gas generators can be installed in the laboratory, on or under a bench, eliminating the need for long gas lines from cylinders secured elsewhere.
- Flow rate : 110, 170, 260, 300, 400, 500, 600 cc/min
- Purity > 99.9996%
- Pressure up to 11 bar (160 psi)
- Exclusive 100% titanium multilayer PEM cell : longer life/ better gas purity
- Touch screen with indication in real time : H2 outlet pressure, H2 flow rate, water quality, water level, auto-diagnostics of breakdown with alarms.
- Automatic checking for internal leaks to guarantee maximum safety
- LED indicators status (Ready, Stand-by, Alarm, Off)
- Remote PC monitoring and diagnostic analysis via USB to interface the unit with customer’s PC software (allow to carry out checks and maintenance effectively, only via a remote connection)
- Compact, space-saving stackable design
- Capabilities allowing to work in cascading mode
- Higher flow rates up to 6 L/min
- Automatic flow compensation in the event of unplanned down-time
- Continuous operation for critical applications
|H2 flow rate – cc/min||110||170||260||300||400||500||600|
|Electrolytic cell||Long life Multilayer PEM technology|
|H2 purity||> 99.9996 % (O2 < 1 ppm, Dew Point < -20°C (-4°F))||> 99.9996 % (O2 < 1 ppm, Dew Point < -30°C (-22°F))|
|Delivery pressure||1 – 7 bar (14 – 101.5 psi)||1 – 11 bar (14 – 160 psi)|
|H2 dryer||Static membrane dryer, maintenance free|
|Temperature range||From 5 – 35°C (41 – 95°F) and humidity 80% to 25°C (77°F)|
|Touch screen||Touch screen (operating parameters, system status, alarms) with LED indicators (Power on/off; ready or errors)|
|Dimensions (W x H x D)||27 x 44 x 38 cm (10.5″ x 17″ x 15″)|
|Weight (kg/lbs)||18 / 39||19 / 42|
|Power consumption||75 W||95 W||140 W||180 W||190 W||230 W|
|Electrical supply||220 – 240 V ac / 1 ph / 50 – 60 Hz|
|110 – 120 V ac / 1 ph / 50 – 60 Hz|
|Water quality||Deionised, ASTM II, < 0.1 µS Conductivity|
|Supply pressure||Max. 6 bar|
|Internal water tank||2.3 liters|
|External water tank capacity (Optionnal)||5 or 10 liters|
|Hydrogen outlet||1/8 Swagelock|
|Water inlet||Quick release push-in fitting|
|USB/PC Control||N/A||In series|
|ACCESSORIES||Water tank 5 liters||Water tank 10 liters|