COSMOS MF.H2 Hydrogen Generator

COSMOS MF.H2 Hydrogen Generator

High Purity - Dynamic regeneration dryer

Reference | COSMOS.MF.H2.[Flow rate]
Hydrogen
Fuel cell, GC-Carrier gas, GC-FAST, GC-FID, GC-FPD, GC-MS, GC-NPD, GC-TCD, Hydrogenation, ICP-MS, THA

The COSMOS MF.H2 Generator is designed for GC-carrier gas and detectors requiring Hydrogen fuel gas, such as FID, FPD, NPD and TCD. 

The Hydrogen gas is produced from deionised water using the exclusive 100% titanium Proton Exchange Membrane (PEM) technology, which provides a very high reliability, new longer life and better H2 purity. 

The exclusive cold dual dynamic regeneration dryer is completely maintenance free and eliminates all down time for maintenance that is typical of other systems on the market, guaranteeing the best hydrogen purity 24 hours a day. 

The automatic checking for internal leaks whenever starting the units and constant control of operating parameters, guarantee maximum safety. 

The touch screen LCD interface provides simple and user-friendly management of all functions on the unit. 

cosmos-mf-h2-hydrogen-generator

Advantages product

IMPROVED CHROMATOGRAPH RESULT 

 The use of hydrogen as a carrier gas allows :
- Faster and more sensitive than the more expensive helium
- Lower temperature elution, thus extending the life of the chromatograph column
- Run time savings of 25% to 35% without a decline in resolution 

INCREASED LABORATORY EFFICIENCY 

A constant, uninterrupted gas supply of guaranteed purity eliminates interruptions of analyses to change cylinders and reduces the amount of instrument re-calibrations required. 

IMPROVED SAFETY

The very limited internal volume (less than 50 ml) allows safe use of the gas generators where the use of cylinders is risky or prohibited. 

The application of tested safety technologies stops the unit in the event of leaks or malfunctions 

SIMPLE INSTALLATION

Gas generators can be installed in the laboratory, on or under a bench, eliminating the need for long gas lines from cylinders secured elsewhere.

Characteristics

 Flow rate : 110, 170, 260, 300, 400, 500, 600, 1000, 1200, 1350, 1500 cc/min
 Purity > 99.99999%
 Exclusive cold dual regeneration dryer : removes both moisture plus oxygen and eliminates the need to monitor, change and purchase desiccant cartridges
 Pressure up to 11 bar (160 psi) : suitable for fast and high-speed GC methods
 Option : Cold Palladium Catalyst reduces O2 < 0.01 ppm and moisture < 1 ppm
 Exclusive 100% titanium electrolytic cell : longer life/better gas purity
 LCD touch screen with indication in real time : H2 outlet pressure, H2 flow rate, water quality, water level, auto-diagnostics of breakdown with alarms
 LED indicators status (Ready, Stand-by, Alarm, Off)
 Remote PC monitoring and diagnostic analysis via USB to interface the unit with customer’s PC software (allow to carry out checks and maintenance effectively, only via a remote connection)
 Automatic checking for internal leaks to guarantee maximum safety
 Capabilities allowing to work in cascading mode

Specifications

Models
MF.H2.110
MF.H2.170
MF.H2.260
MF.H2.300
MF.H2.400
MF.H2.500
MF.H2.600
MF.H2.1000
MF.H2.1200
MF.H2.1350
MF.H2.1500
GENERALS INFORMATIONS
H2 flow rate -cc/min
110
170
260
300
400
500
600
1000
1200
1350
1500
Electrolytic cell
Long life Multilayer PEM technology
H2 purity
> 99.99999% (O2 < 0.1 ppm, dewpoint H2O < -75°C (-103°F))
Delivery pressure
1 – 11 bar (14 – 160 psi)
H2 dryer
Exclusive cold dual regeneration dryer (PSA dryer)
Cold Palladium
Catalyst (Option)
Reduces O2 < 0.01 ppm and moisture < 1 ppm
Temperature range
From 5 – 35°C (41 – 95°F) and humidity 80% to 25°C (77°F)
Touch screen
Touch screen (operating parameters, system status, alarms) with LED indicators(Power on/off; ready or errors)
Dimensions
(W x H x D)
27 x 44 x 38 cm (10.5″ x 17″ x 15″)
Weight (kg/lbs)
17 / 37.5
18/29.6
20 / 44
21 / 46
22 / 48
Power consumption
100 W
120 W
165 W
205 W
220 W
255 W
385 W
440 W
700 W
Electrical supply
220 – 240 V 50 Hz
110 – 120 V 60 Hz
WATER
Water quality
Deionised, ASTM II, < 0.1 μS Conductivity
Supply pressure
Max. 6 bar
Internal water tank
2.3 liters
External water tank capacity (Optionnal)
5 or 10 liters
CONNECTIONS
Hydrogen outlet
1/8 Swagelock
Water inlet
Quick release push-in fitting
COMMUNICATION
USB/PC Control
In series
RS232/RS485
Option
SPECIAL FUNCTION
Cascading mode
Option
Automatic water tank refill
Option
ACCESSORIES
Water tank 5 liters
Water tank 10 liters
Hydrogen Sensor for GC-oven
Part Number
water.tank.005
water.tank.006
sensh2.h2.005

Download documentation

Disposer de toute l’information nécessaire pour mener à bien votre projet est fondamental, c’est pourquoi nous vous mettons à disposition ces documents.

N’hésitez pas à nous contacter pour toutes questions.

COSMOS MF.H2 Hydrogen Generator - Data sheet (EN)
COSMOS MF.H2 Hydrogen Generator - Setup guide
COSMOS MF.H2 Hydrogen Generator - User manual

Quotation request

Your Name*
Your Email*
Your Phone*
Name of Company*
Your Role*
Your Country*
Interested in*
How did you hear about us?*
What is your request*
Your Message*